RO CONTROLLER
The Industrial RO control panel provides for very convenient mounting and easy field cable terminations. Removable terminals blocks are provided for easy terminations. Different sizes ofterminals are selected for process and power connections to avoid wrong connections.
There are two modes of operation,
1) Auto Mode.
2) Manual Mode.
All the protections like Current Overload, Over / Under Voltage, Phase Current Unbalance are effective in Auto as well as manual mode. Auto/
Manual selection is done with the help of a front panel switch.. In either mode, in case of a fault, the relevant pump motor is tripped.
SPECIFICATIONS:
SUPPLY VOLTAGE :
230VAC ±10%, 50Hz. For 11M
model (Upto 3 HP), 400VAC ±10%, 50Hz. For 13M (Upto 7.5HP)
RESOLUTION CURRENT:
0.1 A
ENVIRONMENTAL:
- Working Tem: 0 to 55º C
- Storage Tem : 10 to 70º C
- Relative humidity : 0 – 95 % (Non- Condensing)
- Warm up time : 10 Sec
ENCLOSURE:
- Mounting : Panel mounting.
- Dimensions : 225 (W) x 255 (H)x132 (L)
- Cutout Size : 190 (W) x 215 (H).
INTRSUCTION FOR SETTINGS THE PANEL
1. SET : This key is used to change the controller from RUN mode to FUNCTION mode for parameter setting.
2. INC : Up scroll the parameters & parameter value. (Also to restart the system)
3. DEC : Down scroll the parameters & parameter value. (also to acknowledge Cond. High Alert)
4. ENT : This key is used to Select/Save & to move to next parameter
RO CONTROLLER
The Industrial RO control panel provides for very convenient mounting and easy field cable terminations. Removable terminals blocks are provided for easy terminations. Different sizes ofterminals are selected for process and power connections to avoid wrong connections.
There are two modes of operation,
1) Auto Mode.
2) Manual Mode.
All the protections like Current Overload, Over / Under Voltage, Phase Current Unbalance are effective in Auto as well as manual mode. Auto/
Manual selection is done with the help of a front panel switch.. In either mode, in case of a fault, the relevant pump motor is tripped.