PUMP RELAY
This relay is used to Protect Your Chiller Compressor ( 1 Phase ) against Under Voltage & Over Voltage. IF Under & Over Voltage Conditions are OK then Compressor will start Immediately. Controller will Check Pump Command for 3 Min. If there is No feedback from the Pump, Compressor Becomes OFF. If Feed back is received from the Pump then Compressor will continue to work.
TECHNICAL SPECIFICATIONS
AUX. SUPPLY :
230 VAC +/- 5%
OUTPUT CONTACT :
Relay 230 VAC 7 Amps for CP & Pump.
PUMP RELAY
This relay is used to Protect Your Chiller Compressor ( 1 Phase ) against Under Voltage & Over Voltage. IF Under & Over Voltage Conditions are OK then Compressor will start Immediately. Controller will Check Pump Command for 3 Min. If there is No feedback from the Pump, Compressor Becomes OFF. If Feed back is received from the Pump then Compressor will continue to work.